The basic connecting cable for any development board. Use these cables to hook any computer with a standard RS232 Serial port to any of our boards. Cable color and shape may vary slightly from image as our stock rotates. 3 feet long Female to...

Parallel port extension cable. Use this cable to hook any computer with a standard Parallel (Printer) port to any of our boards or programmers. 3 feet long Male to Female Wired straight through

his is 3 inch long cable with Pin for 2.54mm Spacing Polarized Header. The header and  housing is listed at:https://cutedigi.com/polarized-connector-and-housing-2-pin-2-54mm-spacing/

It has a type A male connector on one side and type A female on the other side to allow a second type A male cable to plug and extend the range.

Standard issue USB 2.0 cables. This is the most common A to B Male/Male type peripheral cable. Dimensions: 3 Foot

This USB 2.0 Ethernet adapter adds an Ethernet port to MAC, Windows, pcDuino and Pitaya. When it is connected to Ethernet, the red LED will turn on to indicate connection.   Specification   Switch 10Mbps or 100Mbps network...

USB 2.0 type A to micro USB 5-pin. This is a new, smaller connector for USB devices. Micro USB connectors are about half the height of mini USB. Micro USB is found on newer hand held devices like cell phones and portable media devices. 

This is a GPIO ribbon cable for Raspberry Pi.  It can break out the 2x13 headers of Raspberry Pi to a breadboard. It is with a length of 8.5". 

Simple IDC ribbon cable. Used for AVR programming, general communication, and all around handy-ness.Cable length is 30cm, 2.54mm (0.1") spacing.

Simple IDC ribbon cable. Used for JTAG  programming, general communication, and all around handy-ness.Cable length is 20cm , 2.54mm (0.1") spacing.