This OV7670 video development kit is designed using EP2C8Q208C8N from Altera Cyclone II serial. The kit integrated one SDRAM, one SRAM, one NOR Flash, one SD slot, one OV7670 camera module, and one 2.8" TFT LCD display. The kit can be used to develop and study video/image capture, analyse, and storage.
Besides the hardware, Verilog HDL or NIOS II drivers for the above components are provided. User can develop FPGA RTL and or NIOSII image processing based on this framework.
- LCD board
- The LCD interface board
- FPGA board
- Wall adapter
- Camera Module
The following is the picture of the whole setup:
Introduction to the hardware:
1. FPGA board:
Shown in above picture,
1 is K4S641632, which has 64M bit.
2 is EP2C8Q208C8N, the FPGA chip.
3 is IS61LV25616A-10TI 512Kbyte SRAM.
4 is AM29LV320DB 32Mbit Flash.
5 is FPGA AS programming header.
6 is FPGA JTAG progamming header.
Looking at the back of the FPGA board,
7 is the SD slot. It supports 4-wire SDHC communication.
8 is a 50Mhz active crystal.
The center board is a breakout board that brdiges the LCD board to the FPGA board.
On the LCD board, there is a 2.8" TFT touch LCD screen.