The 2.8 inch TFT LCD module is a special design for Raspberry Pi for portable application. It features a 2.8” display with 320x240 16bit color pixels and resistive touch screen. The LCD is well mated with Pi board and interface with Pi via the high...

    Communication Protocol:  3-wire SPI, 4-wire SPI, and I2C.   Interface headers: GND: ground VCC: 2.8-5.5V D0: clock D1: data RES: reset DC: data/command select CS: chip select   Specification: Resolution:...

Linker OLED module is an OLED display measured at  0.96 ” and with a  resolution of  128 x 64. It communicates with the host through IIC interface. It is of  high brightness, wide view angle, low power consumption, and small...

This is a basic 20 character by 4 line display. Black text on Green background. Utilizes the extremely common HD44780 parallel interface chipset (datasheet). Interface code is freely available. You will need ~11 general I/O pins to interface to...

This is a basic 16 character by 2 line display with IIC/I2C interface. Black text on Green background. Utilizes the extremely common HD44780 parallel interface chipset (datasheet). This LCD is controlled by I2C, and only requires two IOs. The background...

This is a 4-wire analog touch screen originally designed for a cellphone. Add this touch screen to any LCD you want! Readings are taken by putting 5V across two of the pins and doing an analog to digital conversion on the other two pins. Full X and Y...

As computing terminal expanded gradually from the desktop to the portable handheld device, we have witnessed the rapid development of smart phones. The complex operating system also gradually get rid of the bloated body to be ported into MiniPC from PC...

This is a simple graphic 128x64 graphic LCD with green LCD backlight. It has white characters on blue background. The controller used is KS0108B.    Specification:   Size: 93.0x70.0x13.0 mm Viewable size: 72.0 X40.00 mm Working...

This backpack provide SPI/I2C serial interface to the otherwise parallel 16x2 LCD. There is a switch on the board to select which communication mode we can use. A potentiometer is provided to adjust the backlight. Also, an ON/OFF switch is provided...

This is a 1.8 inch true color TFT LCD come with a TF card  socket. It can work with Arduino Esplora board perfectly. You can run  all the example codes that arduino IDE provided for Esplora TFT LCD. Features: LCD size：1...