This ia a 4 digit 7 segment LEDs that can be used to display clock.   Specification: Model: F5461AH Height: 0.56 inch Dimension: 50.3 x 19.00 x 8.00 mm Color: Black LED color: RED Command...

This is a breakout for a SMT LED with RGB colors that can be indivially controlled.   Specifications:   5050 RGB LED R, G, B individually PWM controlled lines Interface voltage: 5V Common-cathode    

These are sealed addressable 1 meter long 5V RGB LED strips that come packed with 30 WS2812s per meter. Each of these strips are enclosed by a flexible silicon jacket with an IP65 waterproof rating to protect your precious WS2812 LEDs. You...

These are sealed addressable 1 meter long 5V RGB LED strips that come packed with 60 WS2812s per meter. Each of these strips are enclosed by a flexible silicon jacket with an IP65 waterproof rating to protect your precious WS2812 LEDs. You will...

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a yellow LED emitting yellow  with a diameter of 5mm.

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a Blue LED emitting blue with a diameter of 5mm.

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a green LED emitting green with a diameter of 5mm.

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a red LED emitting red with a diameter of 5mm.

Specifications:   Color: White View angle:120° Working Voltage: 12VDC LED Quantity: 300 leds/5 Mete Working Current/meter: 1.2A Working Tempreture:-20 to 50° Protection Rate IP65(waterproof) Size: L500cm (5M) x W1.0cm x T0...

The LED Strip Driver with 4-pin 2.54mm header interface provides easy connectivity to your standard Arduino device. It can help you control the luminance of a single-color LED strip, as well as the color and the luminance of an RGB LED strip through...

  Wire Instruction:   The ground of Arduino and the ground of LED matrix need to be connected. The power supply of LED matrix needs 5V/1A. Arduino Digital Pin 7 -> D of LED matrix   Arduino Digital Pin 6 -> C of LED...

5X7 Square LED Matrix with red color.        For detailed instruction, please go to:   http://www.arduino.cc/playground/Main/DirectDriveLEDMatrix