Introduction This sensor kit based on LinkSprite Linker Kit 2.0. All the sensors used 4 pins connector, except the sensors which use SPI interface. This make the connection more easier, reliable and durable. The kit include LinkNode D1...

Linknode D1 Base Shield is a LinkNode serial sendor shield for LinkNode D1. Than ever before, its interface more robust, more durable. In the future we will launch a large number of LinkNode series of sensors. Feature GPIO x 7 I2C x...

BNO055 board integrate 3 axis 12bit accelerometer and 3 axis magnetometer and 3 axis 16bit gyroscope together. Processing the data collected by the Cortex-M0 ARM processor. You can access the fusion data by programming (quaternions, Euler angle, rotation...

Type a description for this product here... DSO138 was designed as a training oscilloscope kit. It contains only the basical oscilloscope functions with no fancy features. Simplicity in structure and easiness in assembly/operation are among the main...

Introduction This is a powerful sister version of our Linker kit - Temperature and Humidity Sensor. It has more complete and accurate performance. The detecting range of this sensor is 5% RH - 99% RH, and -40°C - 80°C. And its accuracy...

Introduction This is a sensor module for the Bosch BMP180 high-precision, low-power digital barometer. The BMP180 offers a pressure measuring range of 300 to 1100 hPa with an accuracy down to 0.02 hPa in advanced resolution mode. It’s based on...

This is a Linker kit base shield for Beaglebone. All the Linker kit modules can be plugged onto Raspberry Pi through this base shield.   Specification   There are 8 4-pin 2.54mm spacing housing on the base shield:   Digital:...

Serial Servo Driver is a servo driver board that can drive up to  8 servos with a  precision of  5us. The communication interface is TTL UART serial port, and compatible with Linker kit interface.   Specification: Number of...

Path tracking sensor module of Linker Kit uses a reflective infrared sensor (tcrt500). The infrared light is emitted and reflected back to the receiver, it's then inverted by 74LS14 and output to the output pin and the LED. The output signal is a digital...

Flame sensor module of Linker kit is only sensitive to the light in the frequency band of infrared and ultrviolet. This breakout board has 3 useful pins: sensor output signal, power, and ground. The sensor output signal is an analog signal. In an indoor...

Spring based vibration sensor module of Linker Kit uses a spring based sensor. When there is vibration, it will output a digital signal.    Spring Based Vibration Sensor   SW-18010P series are spring type, no directional vibration...

This is a LED module hosted with a green LED of diameter of 10mm.    Download:   Product Wiki     ArduBlock for Linker Kit Introduction ArduBlock is a tile-based visual programming environment, which is designed to...