Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
CuteDigi

Long Range UHF RFID reader Ethernet (1-6M) (ISO18000-6C EPC G2)

$480.00

Long Range UHF RFID reader Ethernet (1-6M) (ISO18000-6C EPC G2)

$480.00
SKU:
LSID-0702-RJ45-J24
Weight:
1.00 LBS
Shipping:
Calculated at checkout
Share

Product Description

LinkSprite Long Range RFID reader with Ethernet RJ45 port (1-6M) (ISO18000-6C EPC G2): typical 2-3M.

 

In  the far-distance RFID system, the ID tag has much less energy compared to that of the reader. This imposes a very high requirement on the reader's receiver sensitivity.  In LinkSprite's  far-distance RFID system, the receiving and transmitting paths are separated, and using different frequencies.  Normally, the transmitting power is between  100mW~500mW.

LSID-0702  has the feature of multiple-protocols, fast response time, multiple-tag reading, directional antenna, and water-proof design that can be used outdoors.

The  application of LSID-0702 can be used in the following:

  • Logistical and warehouse management.
  • Smart parking lot management.
  • Manufacturing processes management.
  • Club management, library management, and other application of Internet of Things.  

After first powere d on, the reader will buzz once to indicate that it starts to work.  When there is tag approaching the reader, it will buzz to indicate that it's sending the data. For the same tag, the read interval can be configured. After read, if the same tag is still in the read area, there will be no further indication, and no data will be sent.  If the time lapse exceeds  interval or different tags enter the reading zone, the reader will read the card and send out data.

When  using the reader, please avoid the reader to be in close contact with metal devices as metal devices can absorb the RF signal, and impact the reading distance.

There  are SDK for this reader that comes with Visual Basic and Visual C++ demo program.

 

 

 

IP address can be set using the COM port:

 

Specification

 

Frequency

920~925MHz , American Standard   902~928MHz,     Specified fix frequencies, or frequencies hopping

Protocols

ISO18000-6B, ISO18000-6C(EPC GEN2)

Frequency hopping

FHSS or Fixed Frequency, set by software

Working Mode

Automatic Reading at programmed timing interval, triggered reading,  reading by software   command. The working mode is configured by software.

RF transmitted Power

0~30dBm,configurable by software

Reading     Distance

Adjustable reading distance: 1  ~  5  meter

Reading     Sensitivity

Bipolarity reading

Response Time

Response time of single tag     with 64 bit ID    <     6ms

Antenna

Integrated directional antenna, gain 12dB

Interfaces

RJ45(TCP/IP) 

Voltage

DC+12V

Reading Indicator

Buzzer

Power

<4W

Working Temperature

-20 C ~ +80 C

Store Temperature

-40 C ~ +125C

Working Humidity

20%  ~ 95%     (no  condensing)

Size

250mm×250mm×75mm

 

 

Download:

 

Product Reviews

Find Similar Products by Category