|
Volume discount, contact us for RFQ Pro Version for Longer distance and data intensive application Based on the feedbacks of previous generations, LinkSprite new second-generation powerline communication modem products are consisted of a PLC-UART motherboard, UART-RS232 daughter board, UART-RS485 daughter board, UART-USB daughter board, and UART-Ethernet daughter board. On the PLC-UART motherboard, there is a 20-pin receptacle, users can choose different daughter boards based on the interface needs. This 20-pin receptacle is pin-compatible with Xbee module from Digi (http://www.digi.com/). So a Xbee module can also be used on PLC-UART, and PLC-UART will become a powerline communication to Zigbee bridge. The new generation PLC-UART motherboard also support DIP by optional pins that can be used to directly plug to user's board without doing screwing. The interface board signals such as RS232/RS485/USB signals are also routed back to motherboard through the 20-pin receptacle, and again to users' board through these DIP pins. Powerline communication transceiver modules from LinkSprite (LinkSprite modules) are transceiver modules designed to send/receiver serial data over the powerline network. PLC-UART is designed to transparently move serial data over the powerline network, and achieves the target of replacing cables by the ubiquitous powerline network. LinkSprite modules have the built-in packet-level repeater function. This feature can greatly extend the coverage of the powerline communication. LinkSprite module has both physical and logic addresses. In a network, both physical and logic addresses can be used to address different nodes in the network. Don't forget the interface card.
Features
- Fully transparent mode, plug and play coming out of the box without the need to do any programming.
- Built-in error correction codes.
- Built-in repeater function to extend the coverage.
- Physical and logic address
- AT commands used for advanced configuration.
- UART interface to host uP
- FSK(Frequency Shift Keying) modulation used in physical layer
- Low power Design
- RoHS
- Small module size, and easy to be implemented into existing products.
Specifications Part Number | PLC-UART-12V-NEC | Interface | UART | Operating Voltage | AC communication, 110V/220V 50/60Hz DC communication | | Module Supply Voltage | External 12V DC | Modulation | FSK(Frequency Shift Keying) | Carrier frequency | 262K/144KHz | Error Correction | FEC(Forward Error Correction) | Raw Data rate on Powerline | 20Kbps | Maximum packet data length | 320bytes | Repeater Hops | 3 Hops | Transmission distance | 300 feets(no repeater) | Support nodes number | 65535 | LED | Power Line Activity LED system LED serial port LED |
Applications- AMR
- Industry manufacture and control
- Safeguard, fire alarm, smoke alarm
- Collect and transmit instrument data
- Safeguard and monitor
- Home automation
- Parking Meters
Download User manual  |
