Introduction This is a Bluetooth module for raspberry pi, which uses the chip nRF51422, the factory firmware is set to transmit transparently mode. The module comes up with the download port, and you can re-burn the firmware. NRF51422 is a single chip...

Features： Designed for Raspberry Pi Model B/B+, easy to use Compatible with Raspberry Pi A+,B,B+/2. Supports Raspbian system, enables your system to: Play videos (supports multi formats, MP4 and so on) Take photos by touching (up to 17 camera...

Features   4 in 1, suit for DIYIRM, infrared receiver module Temperature Sensor Joystick Buzzer Compatible with expansion boards like DVK512 Connections are controlled by jumpers Package Contains Mix Board × 1 LFN0038K...

Support Raspberry Pi B/B+ Driver chip: MAX7219 Dot matrix type: 16x8 common cathode red dot matrix   Download:   User Manual    

The 2.8 inch TFT LCD module is a special design for Raspberry Pi for portable application. It features a 2.8” display with 320x240 16bit color pixels and resistive touch screen. The LCD is well mated with Pi board and interface with Pi via the high...

By adding this pair of infrared LEDs to the Raspberry Pi Camera Module 5MP Wide Angle 160 degree,  we can make a secutiry camera with night vision using Raspberry Pi. 

This is a GPIO ribbon cable for Raspberry Pi B+.  It can break out the 2x20 headers of Raspberry Pi B+ to a breadboard. It is with a length of 8.5". 

This is a 5 foot long HDMI to DVI cable. It supports 1080P. It supports pcDuino.    Download:     Product Wiki

As computing terminal expanded gradually from the desktop to the portable handheld device, we have witnessed the rapid development of smart phones. The complex operating system also gradually get rid of the bloated body to be ported into MiniPC from PC...

This is a infrared remote control kit for Raspberry Pi. By intall the small IR receiver on the Raspberry Pi, you can control XMBC using remote control.     Download: Tutorial

This shield addes the IR transceiver to Raspberry Pi.   Specifications:   1. Infrared Receiver: Frequency: 38KHz Receiving distance: 18-20m Receiving angle: +/- 45 degree 2. Infrared Transmitter: Wavelength: 940nm Transmitting...

This is an add on learning shield for Raspberry shield. It has 6 LEDs, one button and one buzzer. The sample python codes can be found at:   https://bitbucket.org/MattHawkinsUK/rpispy-berryclip   Note: The Raspberry Pi is not included.